Benchmark Japanese land values with public data

Benchmark Japanese land values with public data. Compare 公示地価, 基準地価, 路線価 and actual transaction records, explaining the publication cycle, coverage gaps and appropriate use of each series.

Benchmark Japanese land values with public data | NEEDS Property Research: Apartment buildings at the end of a bridge across Sumida River in Tokyo 273
Benchmark Japanese land values with public data | NEEDS Property Research Another Believer , CC BY-SA 4.0 via Wikimedia Commons

Choosing the right benchmark series

Japanese land prices are released in four separate series, each with a different date, purpose, and coverage. Select the series that matches the date and purpose of your analysis, not the one that is easiest to find. To benchmark Japanese land values with public data, match your reference date to the right survey and then adjust for location and time.

公示地価 (Koji Chika, Public Notice of Land Prices) is issued annually by the Ministry of Land, Infrastructure, Transport and Tourism (MLIT). The valuation date is 1 January, and the figures are released around March of the same year. Approximately 26,000 survey points are assessed nationwide under the 地価公示法 (Public Notice of Land Prices Act). This series is the primary benchmark for collateral appraisal and general market reference.

基準地価 (Kijun Chika, Standard Land Price) is issued annually by each prefectural governor under MLIT supervision. The valuation date is 1 July, and the figures are released around September. Approximately 21,000 survey points are assessed under Article 9 of the 国土利用計画法 (National Land Use Planning Act). This series supplements the 公示地価, particularly in smaller cities and regional areas where the 公示地価 has fewer points.

路線価 (Rosenka, Roadside Land Price) is released annually by the National Tax Agency (NTA). The valuation date is 1 January, and the figures appear around July. Coverage is limited to land facing major urban roads, with approximately 330,000 points. The legal basis is the 相続税法 (Inheritance Tax Act). The typical ratio to 公示地価 is approximately 80% (source: NTA explanation, 2025). Its primary use is inheritance tax and gift tax assessment.

Actual transaction records are released quarterly by MLIT through the 不動産取引価格情報 (Real Estate Transaction Price Information) system. Data collection relies on buyer and seller reports from deal notifications required under the 国土利用計画法. Coverage is limited to deals above certain area thresholds, approximately 2,000 m² in urban areas and 5,000 m² in non-urban areas (source: MLIT, 2025). Smaller deals are excluded, and some data is suppressed for privacy.

Koji chika vs kijun chika

The two official land-price surveys serve different calendar and geographic needs. Koji chika (公示地価) anchors the 1 January reference date with roughly 26,000 points, concentrated in urban and peri-urban areas. Kijun chika (基準地価) anchors the 1 July reference date with about 21,000 points and reaches deeper into smaller cities and regional districts where the January survey has sparse coverage. Neither series covers every municipality, and both rely on selected survey points rather than a parcel-level census. When a site sits far from any point in one series, the other series may offer a closer reference. Choosing between them is a question of date alignment and geographic fit, not a judgment that one is universally better.

Coverage gaps you must consider

No single series covers every parcel. The gaps are systematic:

  • 公示地価 has limited coverage in rural areas, does not assess non-standard land shapes, and only covers parcels near survey points.
  • 基準地価 complements 公示地価 but is still limited to selected survey points; not all municipalities are covered.
  • 路線価 only covers roadsides in urban areas. Mid-block parcels and rural land are not assessed.
  • Actual transaction records exclude smaller deals and non-notifiable transfers. The data is also delayed by 3-4 months after each quarter end.

If the subject site is not near any survey point, you cannot directly apply a released 公示地価 or 基準地価 figure. You must build a location-adjusted benchmark range using nearby points and locational factors.

Rosenka lookup Japan

A rosenka lookup in Japan starts with the National Tax Agency’s online system, which publishes roadside land values for major urban roads. Enter the prefecture, municipality, and road name to retrieve the assessed value per square metre for the relevant tax year. The figure reflects an 80% ratio to the 公示地価 benchmark, so multiplying it by 1.25 provides a rough 公示地価-equivalent estimate. Use that estimate only as a lower-bound sanity check. The rosenka system does not cover mid-block parcels, rural roads, or land without direct road frontage, and it carries no adjustment for site shape, corner influence, or environmental conditions. Treat a rosenka lookup as a tax-oriented cross-reference, not as a market-price proxy.

How to build a dated, location-adjusted benchmark range

The following method produces a benchmark range for a specific parcel. It is not a valuation. It is a data-supported reference range for assessing reasonableness.

Step 1: Select the nearest relevant survey points

For a 1 January reference date, use 公示地価 points. For a 1 July reference date, use 基準地価 points. Identify the three closest survey points to the subject site. Record their released prices per square metre, their valuation date, and their location.

Step 2: Apply a time-adjustment factor

If the analysis date differs from the survey point’s valuation date, adjust using MLIT’s 不動産価格指数 (Real Estate Price Index). This monthly index is released by MLIT with the latest data available for 2025 (source: MLIT, 2025). Calculate the percentage change in the index between the survey point’s date and the analysis date, and apply it to the survey point price.

Step 3: Apply individual locational factors

The 不動産鑑定評価基準 (Real Estate Appraisal Standards, last revised 2014, released by JREI) identifies four categories of individual locational factors: 街路条件 (street conditions), 交通接近条件 (transport access), 環境条件 (environment), and 画地条件 (site shape and size). For each factor, compare the subject site to the survey point and apply a percentage adjustment. For example:

  • Street conditions: width, pavement, and alignment differences.
  • Transport access: distance to the nearest train station or bus stop.
  • Environment: noise, sunlight, and surrounding land uses.
  • Site shape and size: irregular shapes, corner lots, or unusual aspect ratios.

There is no released formula for these adjustments. They require professional judgment. The purpose is to document the assumptions and sources of each adjustment so that any user can see how the range was constructed.

Step 4: Cross-reference with 路線価

For a rough lower-bound check, multiply the 路線価 of the nearest road by 1.25 (the inverse of the typical 80% ratio). This gives an approximate 公示地価-equivalent figure. If the adjusted benchmark range falls significantly below this figure, review the locational adjustments.

Step 5: Cross-reference with actual transaction records

Search MLIT’s 不動産取引価格情報 for deals in the same neighbourhood or similar zoning within the past 12 months. Compare the price per square metre. Actual deal records may be below or above the benchmark range depending on market conditions, seller motivation, and building condition.

Step 6: Document every assumption

For each adjustment, record:

  • The factor adjusted
  • The direction (positive or negative)
  • The percentage or yen amount
  • The source of the adjustment (e.g., “site shape reduces usable area by 10% based on FAR calculation”)
  • The date of the data used

This documentation is the difference between a benchmark range and a guess.

Japanese land price benchmark sources

Four public data series anchor land-price benchmarking in Japan, and each carries a distinct legal basis, release schedule, and geographic footprint. The 公示地価 (Koji Chika) and 基準地価 (Kijun Chika) provide survey-point-based reference values for January and July, respectively, under the Public Notice of Land Prices Act and the National Land Use Planning Act. The 路線価 (Rosenka) series from the National Tax Agency covers roadside frontage in urban areas and serves inheritance and gift tax calculations. MLIT’s quarterly 不動産取引価格情報 feeds actual deal records into the public domain, though coverage thresholds and privacy suppression limit its granularity. Together, these four sources let an analyst triangulate a parcel’s position across assessed benchmarks and observed market activity, provided the analyst accounts for each source’s date, coverage gaps, and legal purpose.

Valuation and feasibility evidence

A benchmark range built from public data supports feasibility screening and evidence gathering, but it does not substitute for a formal appraisal. The 不動産鑑定評価基準 (2014) provides the professional framework for adjusting survey-point values to a specific parcel. Applying that framework requires judgment about street conditions, transport access, environmental quality, and site geometry. When the analysis feeds a deal, financing arrangement, litigation, or tax filing, a licensed 不動産鑑定士 (real estate appraiser) must be engaged. The method described here is a research tool for assembling a transparent, documented reference range from public sources, not a replacement for professional valuation work.

Checklist for using each series

  • Use 公示地価 when you need a general market benchmark with a 1 January date and coverage of major urban areas.
  • Use 基準地価 when you need a 1 July date or when the site is in a smaller city or regional area.
  • Use 路線価 only for tax assessment purposes or as a rough lower-bound check. Do not use it as a market price proxy.
  • Use actual transaction records for trend analysis and price verification, but be aware of the coverage gaps and privacy suppression.

Frequently Asked Questions

How do I find the 公示地価 for a specific address?

Use MLIT’s 国土数値情報 (National Land Numerical Information) web portal or the 地価公示検索 (Land Price Public Notice Search) tool. Search by address or survey point number. The data is free to access and covers approximately 26,000 points nationwide.

Why does 路線価 differ so much from 公示地価?

路線価 is set at approximately 80% of 公示地価 for the same location (source: NTA, 2025). The difference is intentional: the inheritance tax law uses a conservative base to avoid overvaluing assets for tax purposes. It is not a market price.

Can I use 基準地価 to compare two different prefectures?

Yes, but the comparison is only valid if you adjust for the different valuation dates. 基準地価 uses 1 July, while 公示地価 uses 1 January. For a fair comparison across prefectures, use the same series and apply a time-adjustment factor from MLIT’s Real Estate Price Index.

What is the most common mistake when using Japanese land price data?

Using 路線価 as a market benchmark. Many researchers treat it as a current market price because it is updated annually and widely available. However, its statutory purpose is tax assessment, and its ratio to market price varies by location and market conditions. Always cross-reference with 公示地価 or actual transaction records.